Tampilkan postingan dengan label Pemancar FM. Tampilkan semua postingan
Tampilkan postingan dengan label Pemancar FM. Tampilkan semua postingan

Minggu, 08 Juli 2012

Rangkaian Power Amplifier Pemancar FM 4-20 Watt

Rangkaian Power Amplifier Pemancar FM ini sangat sederhana, namun kualitasnya cukup memuaskan.

A very simple fm power amplifier which can deliver 4W rf power with 12V power supply and BLY87A or KT920A and 20W with BLY89A or KT925B.
If you use BLY87A or KT920A the input power must be 0.5W and 4W if you use BLY89A or KT925B. This fm power amplifier is designed to work on 50 Ω antennas and a maximum power supply of 14V and in 88 108 MHz band.
Use only metallic trimmers, a good heatsink for the transistor and ceramic capacitors and keep the pins very short.
FM power amplifier circuit components:
C1 = C8 = 10-40pF + 22pF in parallel ||
C2 = 10-70pF + 120pF ||
C3 = 2.2nF
C4 = 33nF
C5 = 4 x 180pF
C6 = 1nF
C7 = 2.2nF
C9 = 10-70pF + 47pF ||
R1 = 380Ω
R2 = 47Ω
R3 = 5.6 Ω
L1 = 3 turns / 0.8mm / 6mm / legth = 8mm
L2 = 6turns / 0.5mm /over R2
L3 = 5 t / 0.6mm / 6mm
L4 = 4 t / 1.2mm / 8mm
T = 4W with BLY87A, KT920A
T = 20W with BLY89A, KT925B

FM amplifier circuit schematic

 Source: http://electroschematics.com

Kamis, 28 Juni 2012

Kit Pemancar FM Setereo IC BA1404

Jadilah "On Air" dengan stasiun radio sendiri! Pemancar FM Ini merupakan produk menarik yang akan menyiarkan sinyal stereo berkualitas tinggi dalam 88 - 100MHz FM band. Hal ini dapat dihubungkan ke semua jenis sumber audio stereo seperti komputer pribadi, CD player, walkman, televisi, tape deck atau sistem stereo untuk mengirimkan suara stereo dengan kejelasan yang sangat baik di seluruh, kantor Anda pekarangan rumah, atau tanah kamp.
Hal ini juga dapat digunakan dalam mobil untuk memutar CD melalui radio mobil Anda ketika melekat pada CD player pribadi. Aplikasi lain dapat mendengarkan stasiun radio satelit melalui radio FM. Selain itu, dapat dihubungkan ke komputer pribadi atau laptop untuk memungkinkan mendengarkan stasiun radio internet atau pra-rekaman musik digital (seperti file MP3).



Sirkuit yang mencakup snap baterai 9V dan stereo 3.5mm jack dipasang tepat di papan tulis untuk koneksi yang mudah ke sumber audio. Sebuah ON / OFF serta "On-Air" indikator LED juga dimasukkan di papan tulis.
 


Source : http://home.maine.rr.com/randylinscott/feb98.htm
   
Rangkaian ini didasarkan pada IC BA1404 penyiar stereo populer yang berisi semua sirkuit kompleks untuk menghasilkan sinyal FM stereo. Sebuah kristal KHz 38 menyediakan stabil sub-carrier untuk sinyal stereo. Rangkaian osilator cukup stabil untuk penerimaan handal bahkan di radio FM digital disetel. Penyesuaian input terpisah kanan dan kiri tingkat juga disertakan.

Untuk memperoleh Kit ini anda bisa membelinya di CAR'L ELECTRONICS 

Minggu, 24 Juni 2012

Pemancar FM menggunakan Op-amp

Sebuah Transmitter FM daya rendah menggunakan sebuah op-amp sebagai preamp audio dan satu transistor sebagai penguat RF.


List Component:

R1 4K7        R4 150K     R7 3K9 (2K7)

R2 4K7 R5 220R R8 120R (82R)

R3 4K7 R6 4K7

All resistors except R8 are at least 0.25W rated. R8 is at least 0.5W rated
(the 0.6W metal film M-series from Maplin can be used for R1-R8).

C1 1n C4 22uF C7 10n C10 1n

C2 4u7 C5 1n C8 1n

C3 1n C6 10n C9 33pF

VC1 5-60pF IC1 LM358 Q1 ZTX108

Notes
L1 is 0.112uH (this tunes to the middle of the FM band, 98 MHz, with VC1 at its centre value of 33pF).

L1 is 5 turns of 22 swg enamelled copper wire close-wound on a 5mm (3/16") diameter former. Alternatively, you can have a fixed 33pF cap instead of VC1 and have L1 as an adjustable molded coil (eg UF64U from Maplin). VC1 will give you a tuning range of 85 - 125 MHz, and a possible choice is the Philips type polypropylene film trimmer (Maplin code WL72P).

Two sets of oscillator bias resistors are given, the ones in the brackets give about 20% more RF power.

Mike is our favourite Omnidirectional sub-mini electret (Maplin code FS43W). Ant is a (lambda / 4) whip monopole (eg 76 cms of 22 swg copper wire).

Q1 is configured as a Clapp oscillator. Frequency modulation results from the audio voltage changing the transistor's base-emitter capacitance.

Source:  http://www.zen22142.zen.co.uk